Palo Alto Repiping
Galvanized Pipe Replacement in Palo Alto
Palo Alto repiping is an uncommon but critically important service for homes with aging plumbing systems. While most modern homes use PEX or similar material in their plumbing systems, this has not always been the case. For years, the material of choice for a home’s plumbing was galvanized steel. This steel pipe used a protective zinc coating to keep it from rusting. Of course, this coating eventually wears away, leaving the exposed steel vulnerable.
If you know that your home still uses galvanized steel pipes, then you’ve come to the right place! The Palo Alto repiping experts here at Genmor Plumbing, Inc. are the go-to Palo Alto repiping specialists! We offer repipe work that is always top-of-the-line and affordable! Call us today at (408) 215-4612 for an inspection and estimate on your repiping job!
Why Should You Consider A Palo Alto Repipe
Once steel begins to rust, things can only get worse. That means, if your home has galvanized steel pipes, it is only a matter of time before you find rust in your water supply. While mainly harmless, rust in your water can produce an unpleasant odor and appearance. No one wants to drink or bathe in cloudy, red water, which means you need to take care of this problem the moment it appears. That is why our Palo Alto repiping specialists are always standing by to help you.
Of course, even if your home isn’t producing rusty water, you might still want to consider calling our repipe specialists in Palo Alto. For example, you may find that your water pressure is low or that you want to add a new plumbing fixture to your home. In that case, you could have a portion of your home repiped and avoid the Palo Alto whole-house repipe cost.
When is a Repiping in Palo Alto Necessary?
While steel pipes are the most common reason people choose to repipe, it is not the only one. Some of the most prevalent reasons include:
- Leaks and Floods
- Adding A New Plumbing Fixtures
- Replacing Galvanized Steel Pipes
There are, of course, more reasons for considering a repipe in Palo Alto, such as increasing the value of your property. If you have any questions regarding when to repipe your building, please do not hesitate to call. We’re always happy to discuss your Palo Alto repiping needs with you.
Do I Really Need A Galvanized Pipe Replacement in Palo Alto?
At one point in time, galvanized steel was the go-to choice of piping material in the United States. However, opinion has changed over the past few years. The material is no longer up to building codes in California. Galvanized steel plumbing is prone to pitting, rust, corrosion, leaks and is generally considered a hazard to your home. In short, no one is going to force you to have a galvanized pipe replacement in Palo Alto but you can be sure that it will eventually come back to bite you if you put it off. From high water bills to rusty water and health problems, galvanized steel pipes can have a profoundly negative effect on your life.
When Is A Palo Alto Copper Repipe A Good Choice?
When it comes to plumbing materials, copper is king. Not only is copper far less susceptible to the kind of corrosion that made galvanized pipes obsolete, but they also last longer than just about any other material. Copper pipes also do a great job of regulating the temperature of the water in your home. To top it off, they do all of this while adding value to your home!
However, this high-performance material comes at a cost, mainly money and lots of it. Copper pipes can cost up to 4x more than other pipes and can easily push the cost of a whole house repipe into the 5-digit category. This high cost means that a Palo Alto copper repipe is a great choice…if you can afford it
When Is A Palo Alto Copper Repipe A Good Choice?
For a more cost-effective solution, our repipe specialists in Palo Alto recommend PEX piping. PEX (Cross-Linked Polyethylene) is, by far, the cheapest and most practical of all pipe materials. It is flexible, color-coded, and easy to install and remove. PEX will always be more affordable than copper, but it lacks copper’s durability.
How Much Does a Palo Alto Whole-House Repipe Cost?
The average cost of a whole-house repipe in Palo Alto is around 10 to 15 thousand dollars, but varies depending on several factors. These factors may include but are not limited to:
- The Size Of Your Home
- The Current Pipe Material
- City Codes and Regulations
- Cost Of the Replacement Pipes
- Your Home’s Hot Water Situation
- The Number of Plumbing Fixtures In Your Home
With all of these factors, it can be near impossible for the average person to estimate the cost of a whole-house repiping. Thankfully, our experts are always ready to give you an accurate estimate of the costs.
Contact our Palo Alto Repipe Specialists Today!
Found that you need a repiping in Palo Alto? Then look no further than the professionals here at Genmor Plumbing, Inc.! We have the experience, knowledge, and ability to handle any Palo Alto repipe job we come across. Don’t hesitate! If you think a Palo Alto repiping would do you some good, then please give us a call at (408) 215-4612 to schedule an estimate today!